Go, read the whole thing. (RTWT) He is a deep thinker, and I need to read folks like that to help me grow.
Oh, yeah.... I finished the second one....
On this one, I measured, cut, test fitted, and then finished the piece before final assembly. The finish looks a ton better. Still need to Deft the top, middle and bottom. But Hanna may come for a visit, so, I'll wait for less chance of solid humidity.
What a great year. My bright idea to post every couple days has hit the skids. I will attempt to do better!
Weekend Update
The head is still working. However, I am more attuned to nature than I ever was before. When the weather starts to change, or there is a storm coming in, my head goes wonky. Happens when I get stressed out, too. Stress that results from conversation almost 99.9% of the time. It's hard to describe, but it feels like ripples moving from left to right behind my eyes. Makes concentrating difficult. After work some days, it's all I can do to stay awake until bedtime. Again, the stamina isn't quite there. Other days, I run at 100%, usually during work hours. Weird and frustrating. I've done the service calls: MRI, EEG, CAT scan, all negative. I guess that means it's microscopic.
I have really not trusted my self around rotating electrical machinery since April 4th. Hard to budget machine if you aren't in the shop.
So, I decided on the little kitchen rolling cart project for my grand daughter. Almost done with it. Lots of tough evenings, that I couldn't do anything without ruining what I touched. I've bought enough wood to make two if one is scaled down to remove poor cuts. So I'm doing it. I want one of these, too.
From the leftovers, and a couple new pieces
Almost done, still missing something...
When this arrives, the gift will be complete!
Fridge took a dump, so ordered a new replacement. Only a three week wait! A chest freezer would be three months or so. Glad that was purchased during the sanity before the current practice for leftist tyranny. I got a model designed for garage use. I keep it on the porch, in the heat, so hopefully this will last a bit longer than the last one... Yeah, I doubt it, too.
Precision Measuring
Have you seen this? This is a very good introduction to precision measuring. I have some of those Jo blocks, and some space blocks. Maybe a math lesson tomorrow on angles and such. Hmmmm.....
Here is the blurred out part of the women using standards. Over time, the standard will wear, and lose it's precision. It will need calibrating or replacement.
We are standing on the shoulders of GIANTS. We can get precision measuring for the price of a fancy meal. We live in a magic time. A time that is taken for granted by a large percentage of our population.
half the population doesn't know or care how things work, or how to keep them working... sadness
Sometimes I feel like an anachronism. I want to understand the how. I want to understand the why. I want to be able to make and do. Not just use and discard. But I'm here right now, just as you are, even if we don't quite know why just yet. I have a firm belief that we are here for a useful purpose. And these things that fire my curiosity and imagination are important. Somehow... for a reason... a reason that I may not understand just yet. But I'll be dipped if I quit before I do what I can do.
So, one of the guys who reads this attempt at coherent thought left a comment, and I figured I'd show you what I'm working on.
Poplar and pine
the poplar at HD is labeled hobby wood, but it was good for this project. Harder than pine, it's my first foray into hardwood cabinetry.
I started using pocket holes for screens and shelves several years ago, so it made sense to work on this little project the same way.
My work space is very limited. I have a metal shop out back, so I 'borrowed' the front room to use for this quick project. That has stretched into a couple weeks so far...
super sale on the work bench, craigslist miter box, Kreg kit
It's nice to work in a semi-conditioned space for a change. Most of my work is shade tree. But there have been some.... changes that make this an available space.
I dabble in a bit of everything. I'll get back to the machining soon enough. Thanks for stopping by.
Gravy, June flew by. And I have been busy, too busy.
The head is still goofing off some days. I guess this will be a long term battle.
Family issues are up in the batter's box, and I'm not sure how that will work out. I'm kinda hoping they just take off the cleats and go home.
I feel like digging a hole and pulling it in after me some days, but that won't do anyone any good. Millions on welfare are depending on me....
I will try and do better on posting my tool woes. I've been working on a project that'll probably go to my grand daughter. Take a peek at the artist's misconception:
She is a baker, and knows her way around the kitchen. I'll post a pic when I'm done. So far I've been making kindling instead of building the thing. Lots of rework due to crossed eyes maybe....
Happy 4th. Enjoy this one, the next one may be "rockets red glare, bombs bursting in air" for the reals.....
I still haven't finished the Tumico Terrors. I found the metric ER16 collets needed to be torqued a bit too much to grip, so I found some el cheapo ER16 Imperial sized collets for not much coin. Ordered and finally arrived. How do you store them? I mean, they aren't very big atoll. I dug a bit on Thingiverse.com, and found a neat little box. A bit of additive machining... (3D printer), and it squirted out this.
quite literally squirted out
A bit plain jane, but, hey.... I remember a bit of Confusion 360.... so whip up a round tuit, and stick it on the lid. Yeah, like that!
Had a quick trip to the third coast, and couldn't resist my pawn shop rounds there. Each of these were about $5 or $6.... Less than 25 bucks invested. Neat!
Some treasure in there as well!! Who makes CDC brand drills? The two largest rows in the index are CDC brand, HS, USA. Ex-Navy????
Also a bit of misc stuffus....
USN issue. Wonder what was in it originally?
And some cheapo tools in the metal box.... What could I put in there instead??
Sine Table - open
Sine Table - closed
Lots of fun stuff. But I gotta get back to the Tumicos. Almost done with them....
I went to town today to get a new SIDA badge... At the local Intergalactic Airport. For those blessed individuals who don't know, it is a badge that allows access to certain "off limits" areas of the airport air operations area. My current job requires me to be there on occasion. I have to submit to a yearly process of money and time, that gives me just less than 365 days of access.....
Today, was a long wait. New software, dontcha know. Nice older gentleman standing there in the sun waiting like I was, to be called for the process..... We started a conversation, and he mentioned, casually, that he was an astronaut. Wait, an ASTRONAUT?!?!?! Those guys are my rock stars! But I didn't recall his name. Or his face. Why doesn't he look familiar??
We had an hour plus discussion on current events, Starcity, MIR, and a whole host of goodness. I really wanted to quiz him on some details, but mom and dad pounded southern gentleman manners into me, and I listened more than I talked. He was, after all, a member of the brotherhood of men I respect by default.
Fascinating man. Treated me like an equal, and listened to my opinions. I learned a few things today, and really enjoyed the time with him. I was sad when it ended.... AN ASTRONAUT!!!!!!
Col. Blaha, I'd like to buy you lunch sometime......
Oh, and I found out later, 361 combat missions in Viet Nam.
And a Test Pilot!!
I was fooling around on craigslist a couple years ago. Looking for a 3 phase motor to replace one that had been rewound to 460/480 only. (If you need it, let me know!! We can work out a deal.) I found this listing for a weird buffer / grinder. I'd never seen one like it before. Of course I bought it! I might need that someday....
Nice!
Red Wing?? What / who is that?? Well ask a dental lab, and they'll know right away. It is limited to tools about 2 inches in diameter due to the 1/4 hp motor, and single phase. It works a treat with small tools.
It's as quiet as a whisper in church
I was getting ready to start reassembly of these glue clamps, when I remembered it out there, all alone in the shop. I stopped by my local mom and pop hardware store and started looking.... And found these really fine stainless wire wheels. I bought 2, then lost them in the jungle in the front yard. Went back, bought 2 more, and found the others walking back into the house...... Really? I mean, R E A L L Y??????
4 of them, and the little plastic bushing is PERFECT
Okay, I have a lifetime supply now. No problemo. They even fit on the buffer side of the motor!! Sweet! I didn't have to make an arbor for the 3/32" collet on the other side.
Prettied up the spindles..... Now on to the thimbles.... Hmmmmm..... someone was trying to get these apart, and used a grinder to bark up the ends.... No wonder I had such trouble getting them apart.....
Thanks Bubba
So much so that I marked up the tightest one. Well, tough. I'll have to live with it. Run the tap through the threads to make sure they are clean and formed right.
The pliers ate right through that sweatshirt I had wrapped around it. Doh!
And..... One spindle won't thread in. I need to Higbee this thing.
Are those square thread? Rolled?
And I'll use a needle file in the lathe to do that. They haven't made my Tormach yet. Because I haven't ordered it!! Man is this fun or what?!?!?!? Yeah, it's "or what" all right!!!
